Talk to an engineer

Home / Industries / Cement

Cement plant automation, around the kiln

The kiln is the plant. Everything else feeds it or waits on it.

Talk to an engineer

What this plant needs.

The kiln is the plant. Everything else feeds it or waits on it.

  • A kiln stop is daysDrives and controls on the kiln line that do not trip.
  • Energy is the biggest costMill and fan drives sized and tuned for load.
  • Heavy rotating machinesMills, fans and crushers watched before they fail.

Where we work in the plant.

Every area, and what we do there.

  • Stockpile & crushingPrimary crusher, apron feeder and the stacker-reclaimer yard.
    • Crusher drive protection and choke-feed control
    • Stacker-reclaimer automation and pile management
  • Raw millRaw grinding and the blending silo that feeds the kiln.
    • Mill load control and grinding-aid dosing
    • Mill drive and gearbox condition monitoring
  • Preheater towerCyclone stages preheating raw meal on the kiln's exhaust gas.
    • Cyclone blockage detection and draught control
    • ID fan drive migration and speed control
  • Rotary kilnThe kiln itself — inclined, rotating, and the constraint on the whole works.
    • Kiln drive control and torque signature monitoring
    • Burner and fuel management, alternative-fuel blending
  • Clinker cooler & siloGrate cooler recovering heat, then clinker storage.
    • Grate speed and cooling-air control
    • Heat-recovery efficiency monitoring
  • Cement millFinish grinding with gypsum and additives to product fineness.
    • Mill circuit control and separator speed optimisation
    • Blaine / fineness feedback control
  • Packing plantRotary packers, bag filling and the bag-quality reject line.
    • Packer weight control and giveaway reduction
    • Bag reject, dust extraction and housekeeping interlocks
  • Despatch & loadingBulk tanker and bagged-truck loading bays with weighbridge.
    • Loading bay automation and driver self-service
    • Weighbridge and ERP despatch integration

What it has to meet.

The standards and regulations this plant answers to, built into the design.

  • Clean Air Regulations 2014Kiln stack CEMS
  • IEC 60079Coal mill and dust areas
  • ISO 50001Energy management per tonne of clinker
  • ISO 20816Vibration severity on mills and fans

What we bring.

Start with the plant, not the proposal.

Send a photo of the panel, the drive or the problem. An engineer answers.

WhatsApp an engineerdean@tgecorporation.com

Technical notes for engineers

Where we work in a cement plant

Quarry to bagged cement. One continuous line where a kiln stop is measured in days, not hours, and energy is the single biggest cost on the sheet.

Stockpile & crushing

Primary crusher, apron feeder and the stacker-reclaimer yard.

  • Crusher drive protection and choke-feed control
  • Stacker-reclaimer automation and pile management
  • Belt weigher calibration and tonnage reconciliation
  • Conveyor pull-cord and belt-drift safety chain

Raw mill

Raw grinding and the blending silo that feeds the kiln.

  • Mill load control and grinding-aid dosing
  • Mill drive and gearbox condition monitoring
  • Raw-meal chemistry feedback to the proportioning loop
  • Specific energy per tonne of raw meal

Preheater tower

Cyclone stages preheating raw meal on the kiln's exhaust gas.

  • Cyclone blockage detection and draught control
  • ID fan drive migration and speed control
  • Stage temperature and pressure profile trending
  • Emissions monitoring and reporting integration

Rotary kiln

The kiln itself — inclined, rotating, and the constraint on the whole works.

  • Kiln drive control and torque signature monitoring
  • Burner and fuel management, alternative-fuel blending
  • Shell scanner and refractory hot-spot integration
  • Kiln stop and restart sequence hardening

Clinker cooler & silo

Grate cooler recovering heat, then clinker storage.

  • Grate speed and cooling-air control
  • Heat-recovery efficiency monitoring
  • Silo level, extraction and blockage detection
  • Cooler fan drive retrofit and energy metering

Cement mill

Finish grinding with gypsum and additives to product fineness.

  • Mill circuit control and separator speed optimisation
  • Blaine / fineness feedback control
  • Additive dosing accuracy by product type
  • Mill motor and gearbox condition monitoring

Packing plant

Rotary packers, bag filling and the bag-quality reject line.

  • Packer weight control and giveaway reduction
  • Bag reject, dust extraction and housekeeping interlocks
  • Packed-tonnage reporting by product and shift
  • Packer availability and stoppage reasons

Despatch & loading

Bulk tanker and bagged-truck loading bays with weighbridge.

  • Loading bay automation and driver self-service
  • Weighbridge and ERP despatch integration
  • Bay queue and turnaround-time reporting
  • Loading safety interlocks and access control