Home / Industries / Food & beverage
Food and beverage lines that change over fast
Changeovers, not machines, decide how much you make.
What this plant needs.
Changeovers, not machines, decide how much you make.
- Fast changeoversRecipes and line settings switched in minutes.
- TraceabilityEvery batch recorded from intake to pallet.
- Hygiene by designEnclosures and wiring that survive washdown.
Where we work in the plant.
Every area, and what we do there.
- Intake & ingredient silosBulk flour, sugar and powder silos with tipping and blowing lines.
- Silo level, weighbridge and goods-in integration
- Blow-line sequencing and dust-collector interlocks
- Batching & mixingWeigh hoppers, mixers and liquid dosing to recipe.
- Recipe management and versioned batch control
- Load-cell calibration and drift monitoring
- Cooking & extrusionCookers, extruders and formers — where the product is actually made.
- Extruder temperature and pressure profile control
- Screw drive torque trending and wear prediction
- Drying, frying & ovensContinuous dryers, fryers or ovens with zoned heating.
- Zone temperature control and profile logging
- Oil quality, top-up and burner sequencing
- Boiler house & steamSteam generation, feedwater and distribution — the plant's throughput limit.
- Boiler sequencing and load sharing
- Steam-to-production ratio monitoring
- Chillers & cold storeProcess chilling, ammonia or glycol plant and finished-goods cold store.
- Chiller sequencing and floating head pressure
- Cold-store temperature mapping and alarm escalation
- Filling & packingFillers, seamers, wrappers and case packers — the fastest part of the plant.
- Line control, accumulation and starve/block logic
- Checkweigher and metal-detect integration
- Palletising & despatchPalletisers, stretch wrappers and loading bays.
- Palletiser and robot cell integration
- Pallet label, SSCC and warehouse handshake
What it has to meet.
The standards and regulations this plant answers to, built into the design.
- Food Hygiene Regulations 2009Under the Food Act 1983
- HACCP / MeSTIFood safety certification
- ISA-88Batch control and recipes
- IEC 60529IP ratings for washdown areas
What we bring.
Start with the plant, not the proposal.
Send a photo of the panel, the drive or the problem. An engineer answers.
Technical notes for engineers
Where we work in a food & beverage plant
Ingredients in, packed pallets out. The line runs fast and the product is cheap, so the money is in uptime, giveaway and how quickly you can change from one SKU to the next.
Intake & ingredient silos
Bulk flour, sugar and powder silos with tipping and blowing lines.
- Silo level, weighbridge and goods-in integration
- Blow-line sequencing and dust-collector interlocks
- Batch traceability from delivery to finished pallet
- Allergen segregation logic
Batching & mixing
Weigh hoppers, mixers and liquid dosing to recipe.
- Recipe management and versioned batch control
- Load-cell calibration and drift monitoring
- Dosing accuracy and giveaway reporting
- Mixer drive condition monitoring
Cooking & extrusion
Cookers, extruders and formers — where the product is actually made.
- Extruder temperature and pressure profile control
- Screw drive torque trending and wear prediction
- Recipe-linked setpoint changeover
- Scrap and reject-rate dashboard
Drying, frying & ovens
Continuous dryers, fryers or ovens with zoned heating.
- Zone temperature control and profile logging
- Oil quality, top-up and burner sequencing
- Heat recovery and specific-energy per tonne
- Product moisture feedback control
Boiler house & steam
Steam generation, feedwater and distribution — the plant's throughput limit.
- Boiler sequencing and load sharing
- Steam-to-production ratio monitoring
- Feedwater, blowdown and condensate return control
- Fuel and steam metering with M&V
Chillers & cold store
Process chilling, ammonia or glycol plant and finished-goods cold store.
- Chiller sequencing and floating head pressure
- Cold-store temperature mapping and alarm escalation
- Compressor condition and energy per kW of cooling
- Defrost optimisation
Filling & packing
Fillers, seamers, wrappers and case packers — the fastest part of the plant.
- Line control, accumulation and starve/block logic
- Checkweigher and metal-detect integration
- OEE by line, shift and SKU with real downtime reasons
- Changeover time capture and reduction
Palletising & despatch
Palletisers, stretch wrappers and loading bays.
- Palletiser and robot cell integration
- Pallet label, SSCC and warehouse handshake
- Despatch reconciliation against production
- Bay door and loading safety interlocks